Raah Safety - Lifting and Handling Aids

Manual Handling Aids, Strops, Clamps etc. ideal for use out on site, in a workshop or warehouse. Very popular with the Offshore Oil & Gas Industry.

The Handling Aids are simple to attach to the item you want to move. They come with specially designed handles to increase grip and greatly reduce pinch points.

Note: product is designed for MANUAL handling purposes ONLY and must NEVER be used as part of any mechanical rigging or lifting set up.

Lift Assist Single Handle - Manual Handling Aid

To aid with the safer handling of pipe, ironwork and tubing sections.

  • Reduces unneccessary bending and lifting
  • Easy to fit - simply pass the strop under the load then pass handle through the strop eye to make a "choke" hitch. Alternatively, the eye may be slipped over the pipe ends
  • Warning: this product is for manual handling only and should not be used as part of any rigging or mechanical lifting arrangement

Rating – 75kg WLL
Minimum Breaking Load – 750kg
Factor of Safety: In excess 10:1
Webbing Belt Strap – 50mm simplex x 9000mm long as standard
Certification: CE Marked, Safe Use Instruction Sheet
Product Code: OHS – S100 - MHAA100
NOTE: Lift Assist products are designed for manual handling purposes ONLY and must NEVER be used as part of any mechanical rigging or lift operations.

Lift Assist Double Handle - Manual Handling Aid

To aid with the safer handling of pipe, ironwork and tubing sections

  • Reduces unneccessary bending and lifting
  • Easy to fit - simply pass one handle under the load so that the strop wraps around the pipe section
  • Lift by cradling the load, with each operator taking up a handle, one each side of the load
  • Warning: this product is for manual handling only and should not be used as part of any rigging or mechanical lifting arrangement

Rating – 100kg WLL
Minimum Breaking Load – 1000kg
Factor of Safety: In excess 10:1
Webbing Belt Strap – 50mm simplex x 1500mm long as standard
Certification: CE Marked, Safe Use Instruction Sheet
Product Code: OHS – D100 - MHAD100
 NOTE: Lift Assist products are designed for manual handling purposes ONLY and must NEVER be used as part of any mechanical rigging or lift operations.

RAAH lift assist double

Lift Assist Choke Valve Sling - 2" Choke Valve Strop

To aid in the safer handling of 2" chicksan valves. To fit simply pass the handling straps under the valve connection butts as shown in pic 2 & 3. The strop with the adjacent velcro retaining strap should be passed under the male connection. Once in place, pass the velcro strap under the opposite side horizontal link strop and secure back on itself. Ensure that strops are not against any sharp edges.

Reduces unneccessary bending and lifting
Easy to fit
Lift by cradling the load, with each operator taking up a handle, one each side of the load

Features
Specifically designed for use in the safe manual handling of chicksan and BOP choke valves.
Allows safe handling and movement of valves, reducing possible hand and finger injuries.
Reduces the need for bending when lifting to assist in safe manual handling procedure.
Provides protection accidental damage to valves & threads through controlled lifting method during assembly.
Fully supports Hands Free/Hands Off Working Policy.
 
Rating – 50kg WLL
Minimum Breaking Load – 5000kg
Factor of Safety: In excess 10:1
Webbing Belt Strap – 25mm simplex polyester webbing
Certification: CE Marked, Safe Use Instruction Sheet
Product Code: OHS-C100 - MHCS100

Note: this product is for manual handling only and should not be used as part of any rigging or mechanical lifting arrangement

RAAH lift assist choke valve string