Tool Tether

RAAH teather tool

When working at height it is always important to secure tools and equipment so that they do not fall and injure those on the ground. Tethers create fit-for-purpose attachment points on your tools to make them suitable for work at height.
Without the tool tether it would be impossible to secure some tools to the lanyard. Therefore, the tool tether becomes an integral part of safety system which should be held as just as important as any other part.
Raah Safety provides Tool Tether solutions. We are the suppliers of Tool Tether products in Singapore, Indonesia, India and worldwide.







Shank Tether

Shanks are the quickest and easiest way to tether small hand tools. They come pre-assembled with a clear adhesive heat-shrink sleeve and structural D-Ring anchor point .Simply slide it over your tool handle, shaft or grip, apply heat and you’re done.

SHANK               ( MOULDED GRIPS & SHAPED TOOLS ONLY )

TT-SHANK-S

Single shank - small (5 cm length)Fits shafts Ø 13 - 35 mm

750g

TT-SHANK-M

Single shank - medium (6 cm length)Fits shafts Ø 18 - 45 mm

750g

TT-SHANK-L

Single shank - large (7.5 cm length) Fits shafts Ø 23 - 55 mm

750g

TT-SHANK-MP

Mix Pack - 3x small, 3x medium, 1x large

750g

Pro Shank Tether

Pro Shanks are the quickest and easiest way to tether small hand tools. They come pre-assembled with a clear adhesive heat-shrink sleeve and structural D-Ring anchor point .Simply slide it over your tool handle, shaft or grip, apply heat and you’re done.

PRO SHANK 

TT-SHANK-P-S

Single pro shank - small (10 cm length) Fits shafts Ø 13 - 35 mm

5kg

TT-SHANK-P-M

Single pro shank - medium (12.5 cm length)  fits shafts Ø 12.5 - 45 mm

5kg

TT-SHANK-P-L

Single pro shank - large (15 cm length)Fits shafts Ø 23 - 55 mm

5kg

TT-SHANK-P-MP

Mix Pack - 3x small, 3x medium, 1x large  

5kg

X-Pro Shank

Pro Shanks are the quickest and easiest way to tether small hand tools. They come pre-assembled with a clear adhesive heat-shrink sleeve and structural D-Ring anchor point .Simply slide it over your tool handle, shaft or grip, apply heat and you’re done.

X-PRO SHANK

TT-SHANK-XP

Single x-pro shank - large (30 cm length)Fits shafts Ø 25 - 55 mm

7.5kg

Bayonet Tether

The bayonet tether creates a direct attachment to your tool by choking/looping through drilled or preformed holes and captive handles. An additional toggle allows easy and secure fastening.

BAYONET TETHER

TT-BAY

D-ring attachment point, cord length 18cm, total length 28 cm length

5kg

Wrap Tether

Self bonding rubber tape wraps around Dyneema tethers and tool handle/shaft to form a secure temporary D-Ring anchor point. Easily removable. The tether and special adhesive sleeve can be fitted in minutes over an existing tool handle or along the shank of the tool.

X-PRO SHANK

TT-SHANK-XP

Single x-pro shank - large (30 cm length)Fits shafts Ø 25 - 55 mm

7.5kg

Grinder Tether

Create a secure ring tether point across your grinder head.

GRINDER TETHER

TT-GRIND-S

Small grinder tether, secures across grinder head with M8 spindle

10kg

TT-GRIND-M

Medium grinder tether, secures across grinder head with M10 spindle

10kg

TT-GRIND-L

Large grinder tether, secures across grinder head with M12 spindle

10kg

Hard Hat Tether

Ultra secure hard hat tether. Chokes onto hard hat and locks onto garment with an industrial plastic grip.

HARD HAT TETHER

TT-HHAT

Secure hard hat tether, clips onto garment and chokes onto hard hat

2.5kg

Bolt Sock

Carry small components and assemble them by placing the sock directly over an open thread and fastening to prevent dropped objects. Perforated white mesh provides semi-transparency to visualise operation.

BOLT SOCK

TT-BSOCK-S

Size small - W 16 x L 30 cm

1.5kg

TT-BSOCK-L

Size large - W 23 x L 53 cm

1.5kg

Adhesive Tether Ring

Instantly tether small tools with this industrial grade peel-and-stick adhesive pad and rubber coated wire anchorage ring.

ADHESIVE TETHER RING

TT-ATR

Pad Ø 30 mm - Ring Ø 35 mm

500g

Velcro Anchor

Create secure tether point on waisted and captive tool handle. The Pro-Anchor (Velcro) fastening system provides maximum anchorage flexibility and directional load security. The design allows the strap to be easily repositioned, and combined with the unique unidirectional geometry provides high shear performance.

VELCRO ANCHOR

TT-ANCH-V-5

max tool Ø 50 mm, 15 mm height

5kg

TT-ANCH-V-8

max tool Ø 80 mm, 15 mm height

5kg

Flush Shackle

Tether designed for shaped tools (spanners, podgers etc.), flush bolt design prevents snagging and provides extra security, moves freely up and down the tool shaft to facilitate holstering and prevent obstruction during operation, can be made permanent using Loctite

FLUSH SHACKLE

TT-DSHACK-1

Standard shank -10 x 20 mm inside fitting

30kg

TT-DSHACK-2

Standard shank -13 x 25 mm inside fitting

30kg

TT-DSHACK-3

Standard shank -16 x 32 mm inside fitting

30kg

TT-DSHACK-4

Long shank - 10 x 29 mm inside fitting

30kg

TT-DSHACK-5

Long shank - 13 x 43 mm inside fitting

30kg

TT-DSHACK-6

Long shank -16 x 49 mm inside fitting

30kg

Titanium Split Ring

Quickly tether small tools with captive holes (spanners, screwdriver etc.), strong flat profile bar, also suitable as an inline weak-link conntector

TITANIUM SPLIT RING

TT-SRING

Ø 31 mm, thickness 4mm

500g

Omni Anchor

Omni Anchor wire tool tether has been developed to provide a securing fixing via passing through the captive hole within tool handle, providing a rated anchorage/fixing point for your existing selection of tools. Wire Omni is ideally suited to harsh environments, where there is exposure to heat, sharp edges or chemical contaminates.

OMNI ANCHOR

TT-OMNI

Passes through captive holes sizes Ø 7 - 16 mm, provides omni directional

 anchorage, total usable length 11 cm

5kg

Tool Chuck

Rotational tether for small diameter items (screwdrivers etc.), fits onto tool shaft and secures via grub screw, swivelling tether point, includes allen key and grub screws.

TOOL CHUCK

TT-CHUCK-6

Single Tool Chuck -Fits tools shafts Ø 3 to 6 mm

1kg

TT-CHUCK-8

Single Tool Chuck -Fits tools shafts Ø 5 to 8 mm

1kg

TT-CHUCK-10

Single Tool Chuck -Fits tools shafts Ø 7 to 10 mm

1kg

TT-CHUCK-12

Single Tool Chuck -  Fits tools shafts Ø 9 to 12 mm

3kg

TT-CHUCK-17

Single Tool Chuck -Fits tools shafts Ø 11 to 17 mm

3kg

TT-CHUCK-20

Single Tool Chuck -Fits tools shafts Ø 16 to 20 mm

3kg

TT-CHUCK-26

Single Tool Chuck -Fits tools shafts Ø 19 to 26 mm

3kg

TT-CHUCK-SET

Multi pack -1x chuck of each size (7 total)

1-3kg

Maillon

Standard shaped 6mm screw-gate Maillon connector. All connectors are rated to work with all leading edge tool systems, safety lanyards, structurally rated holsters, bag and belt loops etc.

MAILLON

TT-MAI-Z

Zinc plated steel screw-gate maillon Bar Ø 6 mm, 6.5 mm opening

5kg

TT-MAI-SS

Stainless steel screw-gate maillonBar Ø 6 mm, 6.5 mm opening

5kg

Plain-Gate Karabiner

Zinc plated steel plain-gate karabiner. All connectors are rated to work with all leading edge tool systems, safety lanyards, structurally rated holsters, bag and belt loops etc.

KARABINER // PLAIN GATE*

TT-KAR-PG-Z

Zinc plated steel plain-gate karabiner Bar Ø 5 mm, 7 mm opening

5kg

TT-KAR-PG-SS

Stainless steel plain-gate karabiner  Bar Ø 5 mm, 7 mm opening

5kg

TT-KAR-PG-PRO

Pro stainless steel plain-gate karabiner  Bar Ø 6 mm, 8 mm opening

30kg

Stainless Steel Screw Gate Karabiner

The karabiner screw gate locking profile insurers against accidently release/opening for increased security. The stainless steel body material provides better durability and improved smother fastening for longer life.

KARABINER // SCREW GATE

TT-KAR-SG-SS

Stainless steel screw-gate karabiner Bar Ø 5 mm, 7 mm opening

5kg

TT-KAR-SG-PRO

Pro stainless steel screw-gate karabiner Bar Ø 6 mm, 7 mm opening

30kg