Raah Safety Air Winch Utility

Ingersoll Rand MR150 Man Rider winches are specifically designed to minimize the risks of lifting people. They meet or exceed strict safe-lifting standards and include features like emergency lowering, slack line prevention and redundant braking systems to help ensure the safety of workers. Trust Ingersoll Rand Man Rider winches to help you protect your most important asset, your people.
Raah International - Raah Safety are suppliers in Singapore, Malaysia, Indonesia, Vietnam, Thailand, Bangladesh, India, Kuwait, Dubai, Oman, Saudi Arabia and more for Ingersoll Rand Air Winches – Man Rider Series


FA2i-MR Man Rider Winch

Ingersoll Rand’s offering of dedicated and dual purpose (utility and personal lifting) Man Rider winches are known worldwide as the standard for meeting the toughest personnel lifting requirements in the industry.
These rugged, oilfield tough winches have Type Approval or Independent Review certificates issued by the classification societies of ABS, DNV or LRS. Meet NPD, NMD and UK HSE regulations for personnel lifting operations.

Features:
All ANSI / ASME Standard Man Riders carry the designation “MRA - Man Rider, ANSI / ASME” in the model code

  • Battery powered line speed monitor and payout meter with 120 volt charger
  • Display and battery charger enclosures conform to NEMA 13 and JIC standard EGP-1-1967
  • Electrical grounding lug
  • Dual drum brakes: one automatic and one manual
  • Automatic spring return “lift & shift” double action throttle lever prevents accidental starts
  • Dual rated at 8:1 design factor for personnel lifting and 5:1 design factor for utility lifting
  • Up and down limit switches are easily adjusted and locked to prevent over travel

FA2.5i-MR Man Rider Winch

Ingersoll Rand’s offering of dedicated and dual purpose(utility & personnel lifting) Man Rider winches are known worldwide as the standard for meeting the toughest personnel lifting requirements in the industry.
These rugged, oilfield tough winches have Type Approval or Independent Review certificates issued by the classification societies of ABS, DNV or LRS. Meet NPD, NMD and UK HSE regulations for personnel lifting operations.

Features:

  • Minimum design factors of 8:1.
  • Dual Brakes.
  • Drum Guards.
  • Exhaust manifold, ten feet of exhaust hose and muffler are included to keep sound levels below 90 dBA
  • Owner’s manual and ANSI / ASME Standard included in weatherproof box attached to winch
  • Test certificate verifying performance and required brake holding capacity

FA5i-MR Man Rider Winch

Ingersoll Rand’s offering of dedicated and dual purpose(utility & personnel lifting) Man Rider winches are known worldwide as the standard for meeting the toughest personnel lifting requirements in the industry.
These rugged, oilfield tough winches have Type Approval or Independent Review certificates issued by the classification societies of ABS, DNV or LRS. Meet NPD, NMD and UK HSE regulations for personnel lifting operations.

Features:

  • All ANSI / ASME Standard Man Riders carry the designation “MRA - Man Rider, ANSI / ASME” in the model code
  • Battery powered line speed monitor and payout meter with 120 volt charger
  • Display and battery charger enclosures conform to NEMA 13 and JIC standard EGP-1-1967 • Electrical grounding lug
  • Dual drum brakes: one automatic and one manual
  • Automatic spring return “lift & shift” double action throttle lever prevents accidental starts
  • Dual rated at 8:1 design factor for personnel lifting and 5:1 design factor for utility lifting
  • Up and down limit switches are easily adjusted and locked to prevent overtravel
  • Exhaust manifold, ten feet of exhaust hose and muffler are included to keep sound levels below 90 dBA
  • Owner’s manual and ANSI / ASME Standard included in weatherproof box attached to winch
  • Test certificate verifying performance and required brake holding capacity

FA150KGi Man Rider Winch

FA150KGi Man Rider winches have been designed and built to meet the requirements of the Oil Exploration Industry, particularly those specifications of the Norwegian Petroleum Directorate and the DNV. They have design Type Approval by Det Norske Veritas (DNV) and the American Bureau of Shipping (ABS).It remains the user’s responsibility to determine the suitability of this product for any particular use and to check for compliance with applicable regulations.

  • Features:
    Upper and lower limit switches
    • Slack rope detector
    • Press roller
    • Emergency stop button
    • Overload device
    • Emergency lowering capability
    • Automatic drum brake
    • Enclosed automatic oil bath "wet" disc brake is fully sealed against salt spray, dirt or moisture and provides trouble-free operation over thousands of lifting cycles
    •Internal gearbox / disc brake combination provides superior load control
    • Corrosion resistant drum guard
    • CE Compliance
    • Muffler
    •10:1 design factor
    • Compact frame and fabricated alloy steel drum fit into tight spaces.
    • Standard design temperature range is 0oC through 60oC; optional design    temperature of -20oC
    • Minimum 18:1 drum diameter to wire rope diameter ratio
    reduces wire rope wear
    • Data book and "Type Approval" certificates available
    upon request
    • Marine 812 finish paint "P" standard on FA150KGi models
    • Pre-certified lifting lugs
    • Filter, regulator, lubricator

LS2-150RLP-L-E Man Rider Winch

The LS2-150RLP-L-E pneumatic Man Rider winch is specially designed for safe and reliable personnel lifting operations by means of a safety harness on offshore rigs and platforms in a heavy duty and critical offshore working environment. It is designed to meet the latest NPD and European Machinery Directives and is type approved by DNV. It is delivered with the CE mark and an EC declaration of conformity.


Features

  • Compact modular construction
  • Design factor 10:1 on main load bearing parts.
  • Gear type air moto.
  • High efficiency planetary gear box:
  • Internal automatic multi-disc brake:
  • External automatic band brake (directly acting onto the drum for total safety)
  • Wedge style cable anchor:
  • Local lever throttle control :
  • Pre-equipped Emergency lifting and lowering device :
  • Lifting lugs:
  • Filter, regulator & lubricator:.
  • Marine paint for corrosion protection.
  • Design temperature TD= -20°C.
  • Suitable for Zone 1 and 2 as per ATEX directive 94/9/EC.
  • FEM Classification 4m.

MR150 K Man Rider Winch

Ingersoll Rand MR150 Man Rider winches are specifically designed to minimize the risks of lifting people. They meet or exceed strict safe-lifting standards and include features like emergency lowering, slack line detection and redundant braking systems to help ensure the safety of workers. Ingersoll Rand pioneered the development of Man Rider winches and has provided thousands of them to drilling companies around the world in the most extreme environments. This experience is built into every Man Rider winch we sell. Trust Ingersoll Rand MR150 Man Rider winches to help you protect your most important asset, your people.


Features

  • Overload Protection: Senses when tension exceeds capacity and prevents operation
  • Slack Line Prevention: System Automatically stops the winch from paying out in case of slack wire
  • Integrated Emergency Lowering System: Standard integrated system lowers a rider in case of power failure
  • Automatic Multi-Disc Brake and Automatic Drum Brake: Provides the safety of redundant braking systems
  • Steel Guards: Protects critical components mounted on the winch
  • Stainless Steel Braided PTFE Hoses: For superior corrosion resistance
  • Stainless Steel Drum Guards: Provides outstanding corrosion resistance and adjusts for multiple takeoff angles
  • Stainless Steel and Brass Fittings: For long-lasting corrosion resistance
  • Marine Grade Paint: On carbo-zinc blasted steel provides superior corrosion resistance